Cisco Certified Network Associate (CCNA) Routing and Switching

Course Introduction

This intensive training course covers the network fundamentals covering compare and contrast OSI and TCP/IP models, compare and contrast TCP and UDP protocols, describe the impact of infrastructure components in an enterprise network, describe the effects of cloud resources on enterprise network architecture, compare and contrast collapsed core and three-tier architectures, compare and contrast network topologies, select the appropriate cabling type based on implementation requirements and apply troubleshooting methodologies to resolve problems.

Further, this course will also discuss the Configure, verify, and troubleshoot of ipv4 addressing and subnetting, compare and contrast ipv4 address types, describe the need for private ipv4 addressing, identify the appropriate ipv6 addressing scheme to satisfy addressing requirements in a LAN/wan environment, configure, verify, and troubleshoot ipv6 addressing, configure and verify ipv6 stateless address autoconfiguration, compare and contrast ipv6 address types; and the LAN switching technologies, describe and verify switching concepts, interpret ethernet frame format, troubleshoot interface and cable issues (collisions, errors, duplex, speed), configure, verify, and troubleshoot VLANS (normal/extended range) spanning multiple switches, configure, verify, and troubleshoot inter switch connectivity.

During this interactive course, participants will learn the Configure, verify, and troubleshoot STP protocols, configure, verify and troubleshoot STP related optional features, configure and verify layer 2 protocols, configure, verify, and troubleshoot (layer 2/layer 3) Ether Channel, describe the benefits of switch stacking and chassis aggregation; the routing technologies, routing technologies, routing technologies and describe how a routing table is populated by different routing information sources; the WAN technologies, configure, verify PPP and MLPPP on wan interfaces using local authentication, configure, verify, and troubleshoot PPPOE client- side interfaces using local authentication; and the Configure, verify, and troubleshoot GRE tunnel connectivity, describe wan topology options, describe wan access connectivity options, configure and verify single-homed branch connectivity using EBGP ipv4 (limited to peering and route advertisement using network command only);

The basic QOS concepts, infrastructure services DNS lookup operation, troubleshoot client connectivity issues involving DNS, configure and verify DHCP on a router (excluding static reservations), troubleshoot client- and router-based DHCP connectivity issues; Configure, verify, and troubleshoot basic HSRP, configure, verify, and troubleshoot inside source NAT, configure and verify NTP operating in a client/server mode; the infrastructure security and configure, verify, and troubleshoot port security, describe common access layer threat mitigation techniques, configure, verify, troubleshoot ipv4 and ipv6 access list for traffic filtering; ACLS using the APIC-EM path trace ACL analysis tool, configure, verify, troubleshoot basic device hardening and describe device security using AAA with TACACS+ and radius; the infrastructure management, configure and verify device- monitoring protocols, troubleshoot network connectivity issues using ICMP echo-based IP SLA; Configure and verify device management, configure and verify initial device configuration; perform device maintenance, use cisco IOS tools to troubleshoot and resolve problems; andthe network programmability in enterprise network architecture.

Objectives

By the end of the training, participants will be able to:

Apply and gain in-depth knowledge on CCNA Cisco Certified Network Programmer Training

• Discuss network fundamentals covering compare and contrast OSI and TCP/IP models, compare and contrast TCP and UDP protocols, describe the impact of infrastructure components in an enterprise network, describe the effects of cloud resources on enterprise network architecture, compare and contrast collapsed core and three-tier architectures, compare and contrast network topologies, select the appropriate cabling type based on implementation requirements and apply troubleshooting methodologies to resolve problems
• Configure, verify, and troubleshoot ipv4 addressing and subnetting, compare and contrast ipv4 address types, describe the need for private ipv4 addressing, identify the appropriate ipv6 addressing scheme to satisfy addressing requirements in a LAN/wan environment, configure, verify, and troubleshoot ipv6 addressing, configure and verify ipv6 stateless address auto configuration, compare and contrast ipv6 address types
• Optimize LAN switching technologies, describe and verify switching concepts, interpret ethernet frame format, troubleshoot interface and cable issues (collisions, errors, duplex, speed), configure, verify, and troubleshoot VLANS (normal/extended range) spanning multiple switches, configure, verify, and troubleshoot inter switch connectivity
• Configure, verify, and troubleshoot STP protocols, configure, verify and troubleshoot STP related optional features, configure and verify layer 2 protocols, configure, verify, and troubleshoot (layer 2/layer 3) ether channel, describe the benefits of switch stacking and chassis aggregation
• Identify the routing technologies, routing technologies, routing technologies and describe how a routing table is populated by different routing information sources
• Carryout wan technologies, configure, verify PPP and MLPPP on wan interfaces using local authentication, configure, verify, and troubleshoot PPPOE client-side interfaces using local authentication
• Configure, verify, and troubleshoot GRE tunnel connectivity, describe wan topology options, describe wan access connectivity options, configure and verify single-homed branch connectivity using EBGP ipv4 (limited to peering and route advertisement using network command only)
• Describe basic QOS concepts, infrastructure services DNS lookup operation, troubleshoot client connectivity issues involving DNS, configure and verify DHCP on a router (excluding static reservations), troubleshoot client- and router-based DHCP connectivity issues
• Configure, verify, and troubleshoot basic HSRP, configure, verify, and troubleshoot inside source NAT, configure and verify NTP operating in a client/server mode
• Identify infrastructure security and configure, verify, and troubleshoot port security, describe common access layer threat mitigation techniques, configure, verify, troubleshoot ipv4 and ipv6 access list for traffic filtering
• Verify ACLS using the APIC-EM path trace ACL analysis tool, configure, verify, troubleshoot basic device hardening and describe device security using AAA with TACACS+ and radius
• Discuss infrastructure management, configure and verify device-monitoring protocols, troubleshoot network connectivity issues using ICMP echo-based IP SLA
• Configure and verify device management, configure and verify initial device configuration
• Carryout perform device maintenance, use cisco IOS tools to troubleshoot and resolve problems
• Describe network programmability in enterprise network architecture

Training Methodology

This interactive training course includes the following training methodologies as a percentage of the total tuition hours:-

• 30% Lectures, Concepts, Role Play
• 70% Workshops & Work Presentations, Techniques, Based on Case Studies & Practical Exercises, Software & General Discussions
• Pre and Post Test

Target Audience

This course is intended for networking professionals and internetworking professionals.

• Entry-level network engineer
• Network administrator
• Network support technician
• Help desk technician

Daily Topics

DAY I.

• PRE-TEST
• Introduction
• Network Fundamentals
  • Compare & Contrast OSI & TCP/IP Models, Compare & Contrast TCP & UDP Protocols, Describe the Impact of Infrastructure Components in an Enterprise Network, Describe the Effects of Cloud Resources on Enterprise Network Architecture, Compare & Contrast Collapsed Core & Three-Tier Architectures, Compare & Contrast Network Topologies, Select the Appropriate Cabling Type Based On Implementation Requirements, Apply Troubleshooting Methodologies to Resolve Problems
  • Configure, Verify, & Troubleshoot Ipv4 Addressing & Subnetting, Compare & Contrast Ipv4Address Types, Describe the Need for Private Ipv4 Addressing, Identify the Appropriate Ipv6 Addressing Scheme to Satisfy Addressing Requirements In a LAN/WAN Environment, Configure, Verify, & Troubleshoot Ipv6 Addressing, Configure & Verify Ipv6 Stateless Address Auto Configuration, Compare & Contrast Ipv6 Address Types
• Lan Switching Technologies
  • Describe & Verify Switching Concepts, Interpret Ethernet Frame Format, Troubleshoot Interface & Cable Issues (Collisions, Errors, Duplex, Speed), Configure, Verify, & Troubleshoot Vlans (Normal/Extended Range) Spanning Multiple Switches, Configure,Verify, & Troubleshoot Inter switch Connectivity
  • Configure, Verify, & Troubleshoot STP Protocols, Configure, Verify & Troubleshoot STP, Related Optional Features, Configure & Verify Layer 2 Protocols, Configure, Verify, &Troubleshoot (Layer 2/Layer 3) Ether channel, Describe the Benefits of Switch Stacking &Chassis Aggregation

DAY II.

• Routing Technologies
  • Routing Technologies, Routing Technologies, Describe How a Routing Table is Populated by Different Routing Information Sources, Configure, Verify, & Troubleshoot Inter-Vlan Routing, Compare & Contrast Static Routing & Dynamic Routing, Compare & Contrast Distance Vector & Link State Routing Protocols, Compare & Contrast, Interior & Exterior Routing Protocols
  • Configure, Verify, & Troubleshoot Ipv4 & Ipv6 Static Routing, Configure, Verify, & Troubleshoot Single Area & Multi-Area Ospfv2 For Ipv4, Configure, Verify, & Troubleshoot Single Area & Multi-Area Ospfv3 For Ipv6
  • Configure, Verify, & Troubleshoot EIGRP For Ipv4, Configure, Verify, & Troubleshoot EIGRP For Ipv6, Configure, Verify, & Troubleshoot EIGRP For Ipv6, Troubleshoot Basic Layer 3 End-To-End Connectivity Issues

 DAY III.

• Wan Technologies
  • Configure & Verify PPP & MLPPP On Wan Interfaces Using Local Authentication, Configure, Verify, & Troubleshoot PPPOE Client-Side Interfaces Using Local Authentication
  • Configure, Verify, & Troubleshoot GRE Tunnel Connectivity, Describe Wan Topology Options
  • Describe WAN Access Connectivity Options, Configure and Verify Single-Homed Branch Connectivity Using eBGP IPv4 (Limited to Peering & Route Advertisement Using Network Command only), Describe Basic QoS Concepts

DAY IV.

• Infrastructure Services
  • Describe DNS Lookup Operation, Troubleshoot Client Connectivity Issues Involving DNS, Configure &* Verify DHCP on a Router (Excluding Static Reservations), Troubleshoot Client-& Router-Based DHCP Connectivity Issues
  • Configure, Verify, & Troubleshoot Basic HSRP, Configure, Verify, & Troubleshoot Inside Source NAT, Configure & Verify NTP Operating In A Client/Server Mode
• Infrastructure Security
  • Configure, Verify, & Troubleshoot Port Security, Describe Common Access Layer Threat Mitigation Techniques, Configure, Verify, & Troubleshoot Ipv4 & Ipv6 Access List for
  • Traffic Filtering, Verify ACLS Using The APIC-EM Path Trace ACL Analysis Tool, Configure, Verify, & Troubleshoot Basic Device Hardening, Describe Device Security Using AAA with TACACS+ & Radius

 DAY V.

• • Infrastructure Management
    • Configure & Verify Device-Monitoring Protocols, Troubleshoot Network Connectivity Issues Using ICMP Echo-Based IP SLA, Configure & Verify Device Management, Configure & Verify Initial Device Configuration, Perform Device Maintenance, Use Cisco IOS Tools to Troubleshoot & Resolve Problems, Describe Network Programmability in Enterprise Network Architecture
  • Course Conclusion

Training Requirements:

• computer literacy
• PC operating system navigation skills
• Internet usage skills
• IP address knowledge

For registration & more information please contact

NAYEL Training Centre 

Tel: +971 4 379 7245 | Mob: +971 50 249 6876 | WhatsApp +971 50 249 6876

Email [email protected]